Practical and easy to build, this shelving It is made of a vertical wooden position, on which several square shelves are fixed. It can be set at the height of a support railing, or in an exact length that is available. The great advantage is that this type of furniture Does not take up much space.
In addition, it is a functional piece of furniture, which can be used as a library, CD or DVD holder, even as a bedside table or to place ornaments, such as a vase. While the instructions should be followed, details such as the color and shape of the shelves can be changed to suit your specific needs.
For build a bookshelf of this type, we must take a shaft 70 cm long, 17 cm wide and about 2 inches, from which we can make our shelves. This is not so blunt, since the measurements will depend on the exact height of the place where it will be located and what its function will be (it will go more or less to 120 or 160 cm).
Now you must measure the space they have and the type of shelves you want, to cut the width of them. If you want to make different shapes, however, it is recommended to start from the square base and then remove the excess material.
One option is to cut the shelves to different lengths, providing a more original and decorative shelf.
Then, pass a very fine sandpaper on the wood of the shelves, after leaving the grain of the wood and carefully removing the dust, the next step will be to paint the wood. You must give it two coats of paint and let it dry. Mark the position of the holes in the vertical part 5 cm from the top and bottom and drill with a drill.
Then center the vertical shelves and fix the screws on the back of the stand. Repeat this procedure for each shelf. Then finally, you just have to fix the shelf to the wall.
More information - Shelves that cannot be seen (part I)
Source - pourfemme.it