Sometimes we decide to change our home with a reduced budget, for which we change textiles and paint surfaces. If you are determined to change the color of the walls, you may also have to modify the tone of the doors, since they can be little coordinated with the style of the rest of the room. Sometimes we will even only have to paint them on one side.
This is why we are going to see the process on how to lacquer doors at home. Painting doors is a fairly simple process, similar to changing and painting a piece of furniture. It is a little different considering if the door is made of wood or sheet metal, but ultimately, a few simple steps are followed and not much material is required.
Buy the material to lacquer doors
The first thing we must do is buy the material to lacquer the doors. We will need plastics to cover the floor in the area, masking tape to protect the walls and corners, as well as quality paint for wood. In addition, a primer is needed and we will need either a roller or a paint gun. The mask and gloves are also a great idea for doing any type of paint job. In any DIY place they can advise you on everything you need to lacquer a door at home. The material can vary depending on the method we use, both for sanding and painting the door.
First step to lacquer doors
The first thing we must do is remove the doors from their site. They must be unscrewed or disassembled, as this will be the easiest way to paint them later. Some people decide to paint them in the same place, although it can be uncomfortable and the surface may not be as smooth. In addition, in this way we can take the doors to a place where everything gets less dirty and has good ventilation. The frames will be painted in the same place and the wall must be protected with masking tape so as not to paint it with the lacquer paint on the doors. If the doors have glass, these must also be protected with the tape. The floor should be covered with plastic to avoid paint splatter.
Sand the surfaces
Once we have separate doors we must sand the surfaces. They can be sanded lightly and by hand, to remove any varnish they may have. But if we want to do a thorough job we will have to use an electric sander, with which we will also finish much faster. It should be used in the direction of the wood and go little by little, controlling not to sand too much. This process is best done outside or in a ventilated place because it releases a lot of dust, in addition to doing it with a mask and glasses. Next we will have to clean the surface well to remove all that dust that has remained. If it is done with a damp cloth, the surface must be allowed to dry. The next step that we should not skip, although some do not, is to apply a primer. Primer usually protects wood and surfaces, so it is always recommended. In this way our lacquered doors will last much longer in better condition.
Ways to lacquer the doors
When it comes to lacquering or painting doors we can do it with paint and roller, also using the brush, or with a practical paint gun. For beginners the roller is fine, although it gives a little more work. The roller is used for the main surfaces, while we will use the brushes for the corners and the most difficult to access areas. It is necessary to pay attention not to leave drops, since they will be bad and will have to be sanded later to remove them, which can damage the paint, going back to the beginning.
Si we are going to use a gunIt is always better to practice beforehand on a surface to know exactly the distance at which we should spray the paint. The advantage of paint guns is that the job is finished very quickly and that the finish is uniform and very professional, without stains or drops. If we do it right, we will only need one pass to have the doors perfectly lacquered. With the paint spray it is absolutely necessary to use a mask and glasses.
Why lacquer the doors
The doors can be lacquered to give them a different look. If years ago they were carried in wood, now trends tell us about doors in white, to match the Nordic and modern spaces. That is why many people have chosen to paint the doors to match the walls. Another possibility is to paint the door in a tone that stands out against the white wall, so that the door becomes the protagonist. In this way we will make it stand out and give a fun and colorful touch to the room.