To set up a walk-in closet in the bedroom It is not necessary to have a lot of space, but it is enough to know all the necessary steps to make the most of every inch.
I walked through the cabinets of the Cabinets adapted to the needs of each home. The first thing you should know before a reform of them, is if the wardrobe in question is designed with removable panels that should not be considered as an ornament. With a closet customization you will achieve save space and greater effectiveness when storing outfits.
However, if the partitions are made of masonry walls or plasterboard it must be presented, they do not report any startup activity, because it will determine the final changes. Depending on the shape and size of the room, several panels can be built, but always respecting at least the minimum size.
For a rectangular cabin, which can be obtained, for example, from the chamber by opening a cabinet, width of 130 cm is sufficient. The cabin can also be bypassed by closing the short side of a rectangular room. It can be placed behind, in front or side of the bed.
For a corner cabin, equipped with L, it requires at least 250 cm per side. For a wardrobe designed on three sides with a small footprint it is 220 × 160 cm. The different mechanisms for opening the cabin are important for the space that the room can occupy.
The hinged door is the one with the greatest load, equal to its width. The folding door, however, has a size equal to half its width. The sliding they have practically no footprint, since they slide on themselves and overlap. In particular, coplanar have better aesthetics when closed, as they fit perfectly.
The interior can be furnished in various ways, depending on the need for your wardrobe. The suspension should be 105 cm for skirts, pants and jackets, 130/150 for coats and long dresses. Below are the shelves for sweaters and bags, trays for shirts, ties and some drawers.
Incandescent bulbs provide good color rendering in the lightingbut at the expense of heating and have high energy consumption. In contrast, energy-saving lamps, which solve the problem of energy and heat very little, take a few moments to get started.
The solution can be formed by natural light fluorescent staining, which, in addition, being tubular, better distribute the light. The cabinet must be well sealed to prevent the entry of dust and air. But this can lead to odor build-up and condensation.
Therefore, it may be appropriate to install a fan to ensure air exchange and remove moisture.
More information - Different wardrobe options, all very practical
Source - Lavorincasa.it